SEARCH

Get
in touch
Get in touch
×

protected by reCAPTCHA

FLUOROSEAL DOUBLE BLOCK & BLEED SAMPLING PLUG VALVES

Product Description

Because of the double port seals in both directions and the sealed isolation of the chamber below the plug and the areas around the plug, 90° to the port openings, a drainage connection into the plug cavity may be drilled and tapped through the body from either side or the bottom.

A 1/2” (12.7 mm) drain connection is standard, but other sizes can also be provided. Specify connection size; length as indicated on the drawing and whether the bleed valve is required. A FluoroSeal® Fig. R152/302SE is ideally suited as the bleed valve.

ANSI/ASME

Bleed valve diameter 1/2" available in block valve size 2", 2 1/2", 3", 4"

Bleed valve diameter 3/4" available in block valve size 6", 8"

Bleed valve diameter 1" available in block valve size 10", 12", 14", 16", 18", 24"

DIN

Bleed valve diameter DN 15 available in block valve size DN 50, DN 65, DN 80, DN 100

Bleed valve diameter DN 20 available in block valve size DN 150

Technical Specification

Size options
DN15 – 600
Pressure Range
Class 150 to Class 600 lbs, PN16 to PN40
Sleeve materials
PFA, PTFE, RTFE, GF2P, Hi-Temp, UHMWPE
Body Materials
WCB, LCC, CF8M, CF8, CD4MCuN – Other special alloys available
Temperature Range
-29 Deg C To +316 Deg C
Operation
Wrench, gear or actuated
Request a Quote

protected by reCAPTCHA